Boundary Fence Rules and Benefits
The Dividing Fences Act 1991 sets out the requirements and responsibilities of neighbours for boundary fences, and also lays out the height, type, and construction of these structures. For further information, contact your local council. In NSW, fences are often regulated by the NSW Fair Trading Commission and local councils. These laws are meant to minimise escalation in disputes over boundary fences. But, before you build your new fence, be sure to read the guidelines carefully.
The height of your boundary fence must be at least 1.8 meters high, but it may be erected to 2.2 metres. If the boundary fences are too high, you must seek legal advice from a qualified surveyor. In NSW, you can find a surveyor by searching in the Yellow Pages under ‘land surveyors’. You can also apply to the Registrar General of New South Wales for a boundary map.
There are other requirements, including height. In NSW, a boundary fence can be raised up to two metres above ground level, but not more than four meters. If the boundary fence is too high, you may be charged with an offence. For example, you may be accused of breaching a rule of the Encroachment of Buildings Act 1922, which requires you to pay damages for encroachment.
Boundary fences are a legal matter in every state. These boundaries are governed by state legislation and local planning laws. In NSW, the height of a boundary fence can be as high as 1.8 metres above ground. If it is higher than this, you must apply for legal help. If you can’t afford a lawyer, you can try a community justice centre for help. These centers also offer advice on matters relating to fencing, and can also provide free consultation.
Boundary fences must be no more than two metres high. If it is higher than this, you will have to apply for a permit from your local council. A boundary fence can be as tall as three metres. If you want to build it higher, you will need a council consent. But if you want to build it higher, you can always try consulting with your neighbours. The Land & Property Management Authority NSW (LPGA) is the authority that governs the issue of boundary fences in the state.
In the event of a dispute over a boundary fence, the NSW Civil and Administrative Tribunal and the Land and Environment Court can hear your case. If the matter is not resolved by these channels, the courts will look to the rules on dividing fences and decide whether it is legal to build a fence. If you have questions about the rules for dividing fences in your local area, you should contact your local council.
Besides fence height, you should also consult with your neighbours. If you think the height of your fence is too high, you can contact the council and discuss the height. This will help you avoid unnecessary legal troubles. When you do this, you will have the right to build a fence that meets the dividing fence rules in NSW. But before you start your construction, it is important to seek a council permit.
Unless you live in a rural area, it’s important to note that dividing fences are not legal. A judge will not enforce a boundary fence order, but he or she will determine the extent of the fence, and make a ruling for the neighbours. During this process, both parties are required to pay for the same costs of the fence, so you should try to avoid arguing over the cost.
The height of a boundary fence is another important factor. The height of your fence must be at least 1.5m. You can install a wooden fence, a chain link fence, or a dividing wall on a property. But it’s important to consider the location of the boundary. If you’re close to the boundary, this could cause a lot of trouble. Therefore, you should check the regulations of your property first.